Pinp (Picture In Picture); Selecting The Pinp Material; Pinp Transition - Panasonic AW-HS50N Operating Instructions Manual

3. Basic operations

3-4. PinP (picture in picture)

This function involves combining another image with the
background image.

3-4-1. Selecting the PinP material

Select the PinP material using the B bus crosspoint buttons.
1
Press the PinP button to establish the bus
selection mode for the crosspoint buttons.
2
Select the PinP signal using the B bus
crosspoint buttons.
3
Press the PinP button to release the bus
selection mode for the crosspoint buttons.
1, 3
AUX PinP KEY-F/S
BUS DELEGATION
KEY-S
AUX
PGM PVW KEY OUT
1 6 2 7 3 8 4
KEY-F
PinP
AUX
2
MIX WIPE PinP ON KEY ON
TRANSITION TYPE
A
SHIFT
CLN MV
9 5 10
B
SHIFT

3-4-2. PinP transition

When the PinP button is pressed, the PinP image transitions
(fades in) for the transition duration which has been set.
<Setting the transition duration>
[1] TIME/CBGD Menu
2. PinP Time
p The transition duration can also be changed by turning
the OSD/TIME dial while pressing the PinP button.
When the PinP button is held down, the duration setting
is displayed on the OSD menu. The setting can now be
changed while checking what is displayed.
The PinP transition can also be initiated by operating the
slide lever.
<Selecting the slide lever operation>
[13] Operation Menu
7. Slide Lever
FTB ON
CUT
AUTO
BKGD
39