JVC KD-A815 Instructions Manual page 43

Symptom
Disc cannot be played back.
Noise is generated.
A longer readout time is
required ("Reading" keeps
flashing on the display).
Tracks do not play back in the
order you have intended them
to play.
The elapsed playing time is not
correct.
"Please Eject" appears on the
display.
The unit beeps when a folder
is selected.
"Not Support" appears on the
display and track skips.
The correct characters are not
displayed (e.g. album name).
* Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
Remedy/Cause
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
Skip to another track or change the disc. (Do not add
the extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined by the file name.
Folder with numbers on the initial as their names
are sorted in numerical order. However, folder with
no numbers on the initial of their names are sorted
according to the file system of the CD.
This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc (eg. variable
bit rate).
Insert a disc that contains MP3/WMA tracks.
Selected folder is an empty folder*. Select another
folder that contains MP3/WMA tracks.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols.
( 9)
ENGLISH 43