JVC KD-A815 Instructions Manual page 25

The operations explained below are under <Headunit Mode>.
~
Ÿ
USB input
terminal
USB cable from the
rear of the unit
Playback starts automatically.
Caution:
• Some of the applications in the connected
iPod/iPhone may not work correctly with this
unit.
• Avoid using the iPod/iPhone if it might hinder
your safety while driving.
• Make sure all important data has been backed
up to avoid losing the data.
Stopping playback and
detaching the iPod/iPhone
Straightly pull the USB 2.0 cable out from the
unit.
"No USB" appears. Press / SOURCE to listen to
another playback source.
• For details, refer also to the instructions
supplied with your iPod/iPhone.
] Turn on the power.
USB 2.0 cable (accessory of the iPod/iPhone)
and/or
USB 2.0 cable (accessory of the iPod/iPhone)
The following is not applicable in
<External Mode>.
Notice:
When operating an iPod, some operations
may not be performed correctly or as
intended. In this case, visit the following JVC
web site: <http://www.jvc.co.jp/english/car/>
(English website only).
iPod/iPhone
iPod/iPhone
Starts playback or pauses/
resumes playback
• While in <External Mode>, the
sound mutes.
Selects track or
chapter
Fast-forwards or
reverses the track
[Hold]
ENGLISH 25