International Calls; Pause Dialing; Wait Dialing; Redialing The Last Number - Samsung Galaxy S5 User Manual

Adding numbers to the rejection list
Entries can be added to the list via either the Contacts menu or via the Auto reject list menu. The Contacts menu
option assigns all numbers for an individual as rejected. The Auto reject list allows to assign individual numbers.
To assign multiple numbers as rejected via Contacts:
1. From the Home screen, tap Apps g
2. Locate an entry and tap it to open the Contact Overview Screen (page 34).
3. Tap Menu g Add to reject list. All phone numbers associated with this entry are then added to the
reject list.
To assign single number as rejected via Auto reject list:
1. From the main Call settings page, tap Call rejection g Auto reject list.
2. Tap Create and either enter the phone number or select a Contact from your Logs or Contacts list.
3. Tap Save to complete the assignment.

International Calls

1. From the Home screen, tap Phone and then touch and hold until
on-screen.
2. Use the on-screen keypad to enter the country code, area code, and phone number.
3. If you make a mistake, tap Delete once to delete a single digit.
– or –
Touch and hold Delete to delete all digits.
4. Tap Call.

Pause Dialing

You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or financial
phone numbers.
● 2-Second Pause automatically sends the next set of numbers after a two-second pause. This is indicated
in the number string as a comma (,).
1. From the Home screen, tap Phone and use the on-screen keypad to enter the phone number.
2. Tap Menu g Add 2-sec pause. This feature adds an automatic two-second pause.
3. Use the keypad to enter the additional numbers that will be dialed automatically after the second pause.
Tip: You can create pauses longer than two seconds by entering multiple 2 second pauses.
4. Tap Call.
26
Contacts.
the device shows "+"

Wait Dialing

Inserting a Wait into your dialing sequence means that the phone waits until it hears a dial tone before proceeding
with the next sequence of numbers.
● Wait sends the next set of numbers only after tapping Yes. This is indicated in the number string as a
semicolon (;).
Note: Do not add multiple Waits (;) to a number string as this will continue to prompt you after each sequence.
1. From the Home screen, tap Phone and use the on-screen keypad to enter the phone number.
2. Tap Menu g Add wait. This feature causes the phone to require your acceptance before sending the
next set of entered digits.
3. Tap Call.
4. Once prompted to Send the following tones?, tap Yes to dial the remaining digits.

Redialing the Last Number

The device stores the numbers of the calls you've dialed, received, or missed if the caller is identified.
To recall any of these numbers:
1. From the Home screen, tap Phone.
2. Tap the Logs tab to display the list of recent calls.
3. Tap the name/number and tap

Speed Dialing

Once you have stored phone numbers from your Contacts List, you can set up to 99 speed dial entries (2-100)
and then dial them easily whenever you want, simply by touching the associated numeric key.
Note: Speed dial location #1 must be reserved for Voicemail use.
Setting Up Speed Dial Entries
Important! Speed dial location #1 is reserved for Voicemail. No other number can be assigned to this slot.
1. From the Home screen, tap Phone g
2. Tap Menu g Speed dial. The Speed dial screen displays a virtual list of locations with the numbers
2 through 100.
3. Tap an unassigned number slot.
4. Tap a contact and select a number to assign it to the speed dial location. The selected contact number/
image is displayed in the speed dial number box.
Removing a Speed Dial Entry
1. From the Speed dial screen, tap an entry and select
2. Press Back to return to the previous screen.
Call.
Keypad tab.
Remove entry.