AEG DVD 4533 Instrution Manual page 58

English
58
Dolby Digital Setup
Preference Page
05_DVD4533-GB.indd 58 05_DVD4533-GB.indd 58
Dual Mono
The Audio output is normally in stereo. Here you have the possibility to
choose Mono-output instead of Stereo-output.
Stereo:
The Audio output is in Stereo (default).
L-Mono:
The Audio output is in Mono. In this case the signal of the „left"
stereo channel is transmitted to all speakers.
R-Mono:
The Audio output is in Mono. In this case the signal of the „right"
stereo channel is transmitted to all speakers.
Mix Mono:
The Audio output is in Mono. In this case the signal of the „both"
stereo channel is transmitted to all speakers.
Dynamic
The term „Dynamic" (Dynamic Range) describes the ratio of quietest and
loudest sound. If the dynamic range is very large, you will experience
very quiet and very loud sounds.
This may cause replay problems. Let us assume that you are watching a
DVD in a relatively loud environment. You can now increase the volume
to be able to hear also the very quiet passages, however with the
disadvantage that loud passages will be unacceptably loud. In this case
it would make sense to compress the dynamic range (i.e. reduce) and
increase the output volume at the same time.
FULL -1/8:
The dynamic range is compressed slightly (1/8) to full (FULL).
OFF:
The dynamic range is not compressed at all (default).
TV Type
Match the output of the DVD-Player to the colour transfer system of
your playback device.
The following options are available:
PAL:
A system commonly used in Europe.
MULTI:
Select this setting if your playback device is a multi-system unit.
NTSC:
A system primarily used in North America.
Audio; Subtitle; Disc Menu
Audio:
Here you can select the preferred audio language.
Subtitle:
Here you can select the preferred language for the fi lm subtitles.
Disc Menu:
Here you can select the preferred language for the DVD menus.
08.07.2008 16:38:57 Uhr 08.07.2008 16:38:57 Uhr