Sony VPL-CX85 Operating Instructions Manual page 15

Simple Mode: set [On] or [Off].
When [Off] is selected, set the
following.
Setting: select [Ad-hoc (peer-to-peer)] or
[Wireless Access Point].
Network Name (SSID): enter the same
network name as that of the connected
computer. A maximum of 32
characters/numbers can be entered.
Network Channel: when [Ad-hoc (peer-
to-peer)] is selected in [Setting], you can
select from 1 to 11.
When [Wireless Access Point] is
selected in [Setting], [Auto] is selected.
Notes
• If the USB wireless LAN module is
connected to the computer, remove it before
setting.
• You may not be able to use some channel
according to the country.
Data Encryption (WEP): select the data
encryption system.
You can select from among [Off], [64
(40) bit ASCII], [128 (104) bit ASCII],
[64 (40) bit HEX], [128 (104) bit HEX].
When [Off] is selected, [Key] does not
function.
Key: when [Data Encryption (WEP)] is
used, enter the key. Enter the same key
as that of the computer.
The number of the characters/figures is
due to the setting of the [Data
Encryption (WEP)].
• 64 (40) bit ASCII: max. five
characters
• 128 (104) bit ASCII: max. 13
characters/numbers from 0 to F
• 64 (40) bit HEX: max. ten characters/
symbols
• 128 (104) bit HEX: max. 26
characters/numbers from 0 to F
IP Address setting: normally select
[Auto (DHCP)].
When [Manual] is selected, set [IP
Address], [Subnet Mask] and [Default
Gateway].
Note
A DHCP server is needed to make DHCP
valid.
User Memory: select from [User 1] to
Edit: click when you want to enter a new
User Name: enter the user name.
Set to List: click to register the added user
Cancel: click to cancel the user name.
Password
Click [Password].
Administrator: enter [Password] and
Guest: enter [Name], [Password] and
Setting/Operating the Projector from the Computer (via Web)
[User 5].
user name. The [User Name], [Setting]
and [Cancel] button function.
name.
[Confirm Password]. The name is fixed
to [root].
[Confirm Password] of the user.
15