Tuning - Yamaha Silent Guitar SLG-100N Service Manual

TUNING

Use a tuning meter, pitch pipe, tuning fork, piano, etc.,
and to the open strings to the pitches shown below.
• If the string's pitch is high, loosen the string until the string's
pitch is slightly lower than the tuning pitch, then tune while
raising the string's pitch.
Play the standard pitch "lah" (A3: 440Hz) on a tuning fork,
etc., and tune the open 5th string to the same pitch.
Play the pitch produced by pressing the 5th string at the 5th
fret, and tune the open 4th string to the same pitch.
Play the pitch produced by pressing the 4th string at the 5th
fret, and tune the open 3rd string to the same pitch.
Play the pitch produced by pressing the 3rd string at the 4th
fret, and tune the open 2nd string to the same pitch.
Play the pitch produced by pressing the 2nd string at the 5th
fret, and tune the open 1st string to the same pitch.
Play the pitch produced by pressing the 6th string at the 5th
fret, and tune the pitch at the 5th fret of the 6th string to the pitch
produced by the open 5th string.
st
Open 1
nd
Open 2
rd
Open 3
th
Open 4
Open 5 th
Open 6 th
String's Pitch: E
String's Pitch: B
String's Pitch: G
String's Pitch: D
String's Pitch: A
String's Pitch: E
st
Open 1 String's Pitch: E
nd
Open 2 String's Pitch: B
rd
Open 3 String's Pitch: G
Open 4 th String's Pitch: D
Open 5 th String's Pitch: A
Open 6 th String's Pitch: E
1F 2F 3F
SLG-100N
4F 5F
13