V-R171-IMD-HDSDI High Definition Triple LCD Monitor with In-Monitor Display Operating Instructions i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@i-techcompany.com • WEB: www.iTechLCD.com...
Page 2
This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, I-Tech reserves the right not to honor the warranty set forth above.
Video Time Code, three-color "Soft" Tallies, Audio Presence Indicator, and a new The V-R171-IMD-HDSDI tally (OSD and LED) can be controlled in a variety of different ways. Use the Tally Source RotoMenu™ feature that allows fast, direct, and easy menu navigation.
Adequate ventilation is required when installed to prevent Use this setting to assign a name to each screen when using the Image Video or I-Tech-IV protocols. The IMD name is possible damage to the monitor’s internal components.
IMD CONFIGURATION SUBMENU ■ Overview The V-R171-IMD-HDSDI features an In-Monitor Display (IMD) with the ability to display on-screen text and tally in three colors. IMD text, color, and alignment can be assigned to each screen locally using menu options (see below).
6.0 Amps at 12 Volts. The RS-422/485 ports are used to remotely control ■ Audio Monitor the IMD or all V-R171-IMD-HDSDI features, using IMPORTANT: If using a power source other than the a variety of industry standard protocols. (Note: Use the Audio Monitor menu option to enable or disable the audio presence indicator icon.
001 -254 IMD Name User Defined (16 chars max.) When the Tally Source is set to TSL/I-Tech 422, OSD Tally can be set to Off or IMD: IMD Baud Rate 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 •...
On-Screen Menu (continued) On-Screen Menu (continued) OSD CONFIGURATION SUBMENU MAIN MENU AND NAVIGATION Access and navigate the main menu using the 4 menu buttons or the RotoMenu™ knob: Use the OSD Configuration submenu to select a variety of information to be displayed on the screen. OSD Configuration Submenu ■...
On-Screen Menu (continued) On-Screen Menu (continued) Use the Marker Setup submenu to select various types of markers and settings in 4:3 or 16:9 mode. Use the System Configuration submenu to control various system parameters. Exit Back Exit Back Marker Setup Gray Levels Enter Video Config...
On-Screen Menu (continued) On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) MARKER SETUP SUBMENU (continued) ■ ■ 4:3 Markers Aspect Ratio Settings (continued) 16:9 Mode Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the aspect ratio is set to 16:9, or when Pixel-to-Pixel mode is enabled.
1 Down/Decrement Use this menu option to switch between several aspect ratio settings Video Configuration Submenu As the V-R171-IMD-HDSDI monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are ■ Ctemp/Gamma automatically scaled to fit the screen: Use this setting to choose one of three color temperature / gamma presets: •...
Need help?
Do you have a question about the V-R171-IMD-HDSDI and is the answer not in the manual?
Questions and answers