Advertisement
Table of Contents
- 1 Table of Contents
- 2 Illustrations
- 3 Preface
- 4 Warnings
- 5 Packaging
- 6 Installation of Vacuum Tubes
- 7 Description of Controls
- 8 Connections
- 9 Installation Instructions
- 10 Operating Procedure
- 11 Troubleshooting
- 12 Servicing
- 13 Cleaning
- 14 Disposal and Recycling Guidelines
- 15 Limited Warranty
- 16 Specifications
- Download this manual
Advertisement
Table of Contents
Related Manuals for Audio Research Reference 5 SE
Summary of Contents for Audio Research Reference 5 SE
- Page 1 Owner’s Manual Reference 5 SE Stereo Preamplifier...
- Page 2 2 ...
-
Page 3: Table Of Contents
Contents Model Reference 5 SE Stereo Preamplifier Illustrations 4 Preface 5 Warnings 5 Packaging 5 Installation of Vacuum Tubes 5 Description of Controls 6 – 7 Connections 7 Installation Instructions 7 Operating Procedure 7 Troubleshooting 8 Servicing 8 Cleaning 8... -
Page 4: Illustrations
4 ... -
Page 5: Preface
Warnings accompanying illustrated sheet for instructions on installing the tubes for your Reference 5 SE in their 1. To prevent fire or shock hazard, do not expose proper locations in the power supply and audio this product to rain or moisture. -
Page 6: Description Of Controls
R and L channels. level) up or down for both L and R channels. Reference 5 SE provides Unity Gain when this input Volume control is also selectable via Vol UP and Vol is selected. -
Page 7: Connections
WARNING: after replacing tubes, this transformer. Do not stack components or other function should be reset to ‘0’ only by a qualified objects directly on top of the Reference 5 SE. technician. Hours display can be reset to ‘0’ by 3. -
Page 8: Troubleshooting
Refer any needed service to your authorized Audio Research dealer or other qualified technician. The vacuum tubes inside your Reference 5 SE are quality tubes and with normal use should not need to be changed for approximately 4,000 hours of use. -
Page 9: Limited Warranty
MAXIMUM INPUT: 20V RMS BAL, 10V RMS SE. or distributor has accepted the responsibility for RATED OUTPUTS: 2V RMS (1V RMS SE) into 200K ohm warranty of Audio Research products sold by them. balanced load (maximum balanced output The specific terms and remedies for fulfillment of the capability is 30V RMS at less than 0.5% THD at...