Table of Contents
Advertisement
4.4 Digital PTZ (DPTZ) operations
This fixed network camera type has PTZ capability, i.e. digital PTZ (hereafter called "DPTZ"), for wide area
monitoring.
Note:
This function is available only for Megapixel models.
Note:
When this function is enabled, Intelligent Video System, DPTZ, Face Tracking, Smart Zoom, and optical zoom
are not allowed to use.
STEP1: Click "DPTZ" to show the DPTZ control panel.
STEP2: Select the functions when needed:
ICON
FUNCTION
Fit to screen /
/
Restore to original size
Take snapshots
Enable Auto mode
Enable DPTZ
DESCRIPTION
There are several monitor resolutions available. When the selected resolution is out of your
current live view support, a part of your surveillance area might get covered on the screen, and
you need to manually move on the screen to check the covered part.
: This is used to scale the selected resolution to fit in the current live view size.
: This is used to restore the scaled live view resolution to its original size.
Click to take a snapshot of the current view, and save to the location specified in "Config."
"Camera" "Camera" "Snapshot Path".
Click to activate the auto mode of the camera. The auto mode could be "Sequence" or "Auto
Pan" specified in "Config." "Camera" "Cruise" "Active Mode".
Note: This function is available only when DPTZ is enabled.
Sequence: Move to several preset points accordingly and regularly specified in "Config."
"Camera" "Cruise" "Active Mode" "Sequence".
Note: Preset points are set in "Config." "Camera" "Preset".
Auto Pan:
Pan automatically and horizontally.
Click to activate the digital PTZ function. When this function is enabled, the following
operations are available:
Auto mode
Move up / down / left / right after digital zoom-in.
16
Advertisement
Table of Contents
