Related Manuals for Digitus DN-16050
Summary of Contents for Digitus DN-16050
-
Page 1: Quick Installation Guide
IP / ANALOG SURVEILLANCE CAMERA DN-16050 / DN-16051/DN-16052/DN-16052 Quick Installation Guide... -
Page 2: Hardware Overview
1. HARDWARE OVERVIEW 1.1 Rear Panel CONNECTOR / BUTTON DESCRIPTION Reset Default This button is hidden in the pinhole. Press and hold the reset button until the network camera rebooted. This will reset all parameters, including the IP address to factory default settings. Power Indicator When the camera is power-supplied, this indicator will be on as red. -
Page 3: Installation
INSTALLATION 2. INSTALLATION 2.1 Install the Hardware This camera can be installed in two ways: ceiling-mounted and desktop. During the installation, please make sure the upper side of the camera is always facing up, as shown in Figure 1 below, regardless of which installation way you’re using. This is to ensure the video output won’t be up side down. - Page 4 Assemble the bracket: a). Align the stem with the central hole of the base, and rotate it to secure, as shown in Figure 3. b). Align the joint lock with the stem, and rotate it to secure, as shown in Figure 4. Figure 3: Connect the stem to the base Figure 4: Connect the joint lock to the stem 4.
-
Page 5: Assign An Ip Address And Access The Camera
3.2 Assign an IP address and Access the Camera Step 1. Install the Software Place the supplied Video Viewer AP software CD into your DVD- / CD-ROM drive. The installation process will automatically start. Follow the on-screen instructions to install the application programs. After installation, a “Video Viewer”...
Need help?
Do you have a question about the DN-16050 and is the answer not in the manual?
Questions and answers