Enjoying Applications; Using Screen Mirroring - Sony Bravia KDL-60R550A Operating Instructions Manual

Enjoying
Applications
With the Applications, you can display a variety
of information on the screen. Applications
provides easy access to interactive content
when your TV is connected to the Internet.
• Be sure to connect your TV to the Internet, and
complete "Network Set-up".
• If you experience difficulties with this feature,
check that the Internet connection is set up
properly.
1
Press HOME.
2
Press F/f to select "Applications", and press
.
3
Select the applications to display on the
screen.
x To launch Applications
Applications can also launched by pressing the
SEN button on the remote control.
38
GB
Using Screen
mirroring
"Screen mirroring" is a function to display the
screen of a mobile device on the TV by Miracast
technology.
The TV can be connected directly with a Screen
mirroring compatible device (e.g. smartphone,
PC). You can enjoy the display screen of the
device on your large TV screen. No wireless
router (or access point) is required to use this
feature.
1
Press the / button, then select "Screen
mirroring" using F/f buttons.
2
Operate the Screen mirroring compatible
device to connect with the TV.
When the device is connected with the TV, the
screen displayed on the device will also be
displayed on the TV.
For details, refer to the instruction manual of the
device.
x
To list connected devices/deregister
devices
When the standby screen for the Screen
mirroring is displayed, press the OPTIONS
button, then select "Show Device List/Delete".
To deregister a device, select the device in the
list to delete, then press the button. Then, select
"Yes" in the confirmation display.
To deregister all devices, press the OPTIONS
button in the list, select "Delete All", then "Yes" in
the confirmation display.
x To display dialogue when attempting
to connect a device with the TV
Activating this function can avoid an unintended
device from being connected. When the standby
screen for the Screen mirroring is displayed,
press the OPTIONS button, then select
"Registration Notification" > "On".
Note that once you decline registration request
from a device, you will not be able to connect the
device unless you delete it from the device list.
To connect the declined device, press the
OPTIONS button, select "Show Device List /
Delete", then delete the declined device. Then,
make a new connection with the device.