CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
19. Now the LCD MODULE can be released from the UI SHIELD.
21. Open the Flex Connector of the LCD MODULE.
23. To remove the SIDE FLEX both parts of the phone must be
disassembled first.
Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47
Page
4
(46)
CONFIDENTIAL
20. Lever out the EARPIECE.
22. Carefully lever up the TG UI MODULE. This will disconnect the
hidden B to B connector.
24. Start removing the connector of the SIDE FLEX by lifting it up
as shown first.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
24.Sept.2007