Hitachi DH 24PC3 Handling Instructions Manual page 10

English
8. Drilling holes and driving screws (rotation only)
○ Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
9. Drilling holes (rotation only)
Drill chuck (13 VLD-D)
Chuck wrench
○ 13 mm drill chuck ass'y (includes chuck wrench) and chuck (for drilling in steel or wood).
10. Driving Screws (rotation only)
Bit No.
11. Dust cup, Dust collector (B)
Dust cup
9
Drill chuck (13 VLRB-D)
Chuck wrench
Chuck adapter (D)
(SDS-plus shank)
Chuck adapter (D)
(SDS-plus shank)
Bit No.
No. 2
No. 3
Dust collector (B)
Chuck adapter (G)
(SDS-plus shank)
Screw Size Length
3 – 5 mm 25 mm
6 – 8 mm 25 mm
12. Hammer grease A
500 g (in a can)
70 g (in a green tube)
30 g (in a green tube)
Optional accessories are subject to change without
notice.