To Remove Flickering Or Blurring; To Correct The Screen Position - Eizo Foris FS2333 User Manual

●

To remove flickering or blurring

Procedure
1. Choose "Phase" in the "Screen" menu, and press
The "Phase" menu appears.
2. Adjust the phase with
3. Press to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to "To eliminate vertical bars".
(Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●

To correct the screen position

Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display
images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose "Position" in the "Screen" menu, and press
The "Position" menu appears.
2. Adjust the position with
3. Press to exit the adjustment.
4. Close Pattern 1.
24
Chapter2AdjustingScreens
or to minimize flickering or blurring.
/ / / .
.
.