Remote Control (Optional Accessory) - iRobot Roomba Discovery Series 400 Series Owner's Manual

Remote Control
SPOT
Button
CLEAN/Power
Button
The Remote Control lets you conveniently control Roomba's functions.
You can use it to turn Roomba on and off, and steer it around your
room without bending down. It also gives you remote access to these
commands:
. . .
Before using your remote for the first time, install 2 AA batteries (not
included).
TIP: Check that there is a direct line of sight from the Remote Control to
Roomba and that the remote is pointed at Roomba.
The Remote Control and Virtual Walls operate using an invisible infrared
beam. If they are all used in the same area, Roomba may see multiple
infrared signals and will not operate. The Remote WILL NOT work when
Roomba is near Virtual Walls.
(optional accessory)
SPOT
CLEAN
. . .
For more detailed information, visit: www.irobot.com
Directional
Buttons
Roomba spirals approximately three
feet in diameter and then spirals back
to where it started, intensely cleaning a
local area.
Roomba automatically calculates the
room size and adjusts its cleaning time
appropriately.
Models 430-519
Models 520-599
Models 600+
. . .
Button
Roomba enters Spot
mode.
Roomba attempts to
Dock on the Home
Base, if present.
Roomba enters Max
mode and cleans
until the battery is
discharged.