Makita BO6040 Instruction Manual page 9

ASSEMBLY
Installing side grip (optional accessory)
Remove one of the screws which secure
the head cover. Screw the side grip on the
tool securely. The side grip can be installed
on either side of the tool.
Installing or removing abrasive disc
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
Always use hook-and-loop system abrasive discs. Never use pressure-sensitive abrasive
the abrasive disc.
discs.
To install the abrasive disc, first remove all
dirt or foreign matter from the pad. Then
attach the abrasive disc to the pad, using
the hook-and-loop system of the abrasive
disc and the pad. Be careful to align the
holes in the abrasive disc with those in the
pad.
To remove the disc from the pad, just pull
up from its edge.
D
Q
i
-
Abrasive disc
9