Makita BO6040 Instruction Manual page 4

USBO40-2
Specific Safety Rules
1. Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its o w n cord. Contact
with
a
"live" wire will make exposed metal parts of the tool "live" and shock the
operator.
2.
Hold the tool firmly.
3. Do not leave the tool running. Operate the tool only when hand-held.
4. This tool has n o t been waterproofed, so do not use water on the workpiece
5.
Ventilate your work area adequately when you perform sanding operations.
surface.
SAVE THESE INSTRUCTIONS.
4