Makita BO6040 Instruction Manual page 10

Changing pad
Makita offers an extensive range of
optional super soft, soft and hard pads.
Remove the screw counterclockwise from
the center of the base with a hex wrench.
After changing the pad, tighten the screw
clockwise to secure the pad.
Dust
collection
(optional
accessory)
If a Makita hose is used, you can connect the cuff to the nozzle directly. If other hose with
an inner diameter of 24 mm (15/16"), attach the joint between the nozzle and the cuff.
Cuff
7
Hose
7
10