Pairing Samsung Smart Control; Reconnecting Samsung Smart Control - Samsung Smart TV E-Manual

Pairing Samsung Smart Control

"
Availability depends on the specific model and area.
To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via
Bluetooth. Pair Samsung Smart Control to the TV.
"
Samsung Smart Control can only be paired to a single TV.
Point Samsung Smart Control at the remote control sensor of the TV and press the
the TV on.
"
Remote control receiver's location may vary depending on the model.

Reconnecting Samsung Smart Control

If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may
be due to insufficient battery power.
If the problem persists, the Samsung Smart Control restore pairing with the TV.
11
Press RETURN
"
You must place the Samsung Smart Control approximately 30cm ~ 40cm away from the TV and
ensure it is pointing towards the remote control receiver.
21
Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to
TV automatically.
button and GUIDE button simultaneously for 3 seconds.
TV button to turn