Pairing The Samsung Smart Control; Reconnecting The Samsung Smart Control - Samsung UN32H6350 User Manual

Pairing the Samsung Smart Control

The Samsung Smart Control is only available with the LED 6400 and 7100 series.
It may not be supported Samsung Smart Control depending on the country.
To use the Samsung Smart Control with the TV, you must first pair it to the TV via Bluetooth. To pair
the Samsung Smart Control to the TV for the first time:
Turn on the TV by pointing the Samsung Smart Control at the remote control sensor of the TV, and
then pressing the TV
"
The Samsung Smart Control can only connect to one TV at a time.
"
The remote control sensor's location may vary depending on the model.

Reconnecting the Samsung Smart Control

If the Samsung Smart Control stops operating or works abnormally, try replacing the batteries. If the
problem persists, pair the Samsung Smart Control and TV again.
1.
Move to between 1 foot and 13 feet of the TV (30cm to 4m), and then aim the Samsung Smart
Control at the TV's remote control sensor.
"
The closer you are to the TV the better.
2.
Press the RETURN
3.
The Connection in Progress icon appears on the screen. A few moments later, the Connected icon
appears. The Samsung Smart Control is paired to the TV.
button. The TV and Samsung Smart Control pair automatically.
and GUIDE buttons simultaneously for 3 seconds or more.