Fujitsu ScanSnap S500 Operator's Manual page 76

3) When you have finished the setting, click the [OK] button.
4) The following screen is displayed and the new application is added. Click the
HINT
<To remove an application>
1) Select the application you want to remove in the "Add or remove application"
2) The confirmation screen will be displayed. Click the [Yes] button in this screen to
3) Confirm that the application has been removed, and then click the [Close] button.
<To change settings>
1) Select the application to change in the "Add or remove application" screen, and
2) The "Setting of additional application" screen is displayed. Change the desired
3) When you have finished the setting, click the [OK] button.
4) The "Add or remove application" screen is displayed, and the settings are changed.
58
[Close] button to close the screen.
When you add an application, select an application that is able to process files
of the following formats.
JPEG (*.jpg), PDF (*.pdf)
Scanned images cannot be displayed properly unless these file formats are
supported.
Depending on applications, password-protected PDF files may not be opened.
This can be confirmed by the following method:
<Example: To confirm if the selected application is able to process files of
JPEG format>
1. Create a shortcut for the application you wish to add.
2. Drag-and-drop any file in JPEG format (*.jpg) onto the shortcut.
⇒
If the application starts up and the file is opened, the application sup-
ports JPEG format files.
screen, and the click the [Remove] button.
remove the application.
click the [Change] button.
items.
Click the [Close] button to close the screen.