Troubleshooting Checklist - Fujitsu ScanSnap S500 Operator's Manual

5.2

Troubleshooting Checklist

This section describes common problems that may occur during the usage of ScanSnap and how to
resolve them.
Before you request repair service, check the following list.
If you cannot solve the problem after checking the following list, contact an authorized FUJITSU
scanner service provider.
Symptom
The scanner cannot be
turned on.
142
Check This Item
Is the AC/USB cable and
the AC adapter connected
correctly?
Is the paper chute closed?
(The scanner's power is
controlled by closing/open-
ing the paper chute.)
Is Windows normally
started up?
(This scanner's power is
controlled by turning on/off
the computer.)
Did you push the [POWER]
button to turn off the scan-
ner? (The scanner can be
turned off by pressing
[POWER] button when the
paper chute is opened.)
Resolution
Correctly connect the AC/USB cable
and AC adapter.
Disconnect and then re-connect the
AC cable and AC adapter.
(* Wait at least 5 seconds before
reconnecting the AC cable)
Open the paper chute.
Wait until Windows has started up
completely. LED will turn off
when Windows is starting up or in
the sleeping mode.
Press the [POWER] button.