Adjust The Video - RCA TV/VCR COMBINATION User Manual

TV/VCR Features
Using the TV/VCR Features

Adjust the Video

To Adjust Video
To Return to Standard Picture Settings
10
Use the VIDEO menu to adjust the picture to suit your personal
preferences. The TV/VCR will remember the settings you select.
1. Press MENU on the remote, then press the CH
Video is highlighted. Press VOL+ to display the Video menu.
3 4
2. Press CH or to select contrast, brightness, sharpness, color or
tint; then press VOL+ or - to change the setting.
3. Press MENU (or wait a few seconds) to preserve your setting and
to return to the video menu. Once you make a change to a
setting, that setting is used by the TV/VCR each time you turn it
on.
4. Press MENU again to exit the Video menu.
Video
Contrast 100
Bright 50
Sharpness 50
Color 50
Tint 50
:Adjust
:Move
:Menu
1. Press PICTURE on the remote control. Custom appears on the
screen, indicating that custom settings have been stored in
memory.
2. Press PICTURE again to reset to the levels set at the factory.
Standard appears on the screen when settings are reset.
Custom
3 4
or button until
Contrast 90
Standard