Twain Source - Oce OP20 Operation Manual

3-4 TWAIN Source

3-4-1 TWAIN source
The TWAIN source utility is used for controlling the scanning operation with a TWAIN-compatible applica-
tion and having that scanned image displayed in that application. This section of this Handbook contains
explanations on using a TWAIN-compatible application for scanning purposes.
IMPORTANT!
In order to use this method of scanning, the TWAIN source must be installed in the corresponding
computer. If there are going to be multiple computers using this capability, the TWAIN source
should be installed in each of those computers.
1
Perform the desired settings
for the TWAIN mode.
Scanner
Computer
2
Set the original.
5
Scanning Request
6
Scanned Image Data
Transmission
Page 3-48
7
Display of
the Scanned Image
Select the Size of the Original
4
and Desired Resolution
in the TWAIN Source.
3
Select the Scanner from the
TWAIN-Compatible Application.