Sony SRX-R220 Operating Instructions Manual page 23

Message number Error message
ALERT_08 BOARD ERROR
ALERT_09 BOARD ERROR
ALERT_10 BOARD ERROR
ALERT_11 BOARD ERROR
ALERT_12 BOARD DETACHED
ALERT_13 BOARD DETACHED
ALERT_14 BOARD DETACHED
ALERT_15 BOARD DETACHED
ALERT_16 BOARD DETACHED
ALERT_17 BOARD DETACHED
ALERT_18 BOARD DETACHED
ALERT_19 TEMPERATURE ERROR
ALERT_20 TEMPERATURE ERROR
ALERT_21 TEMPERATURE ERROR
ALERT_22 COVER DETACHED
ALERT_25 TEMPERATURE ERROR
ALERT_27 FAN ERROR
ALERT_28 FAN ERROR
ALERT_29 FAN ERROR
ALERT_30 FAN ERROR
ALERT_32 BALLAST ERROR
ALERT_33 BALLAST ERROR
ALERT_34 BALLAST ERROR
ALERT_35 LAMP ERROR
ALERT_36 BALLAST ERROR
ALERT_37 COVER DETACHED
ALERT_38 BOARD ERROR
ALERT_39 TEMPERATURE ERROR
WARNING: Danger level – Middle
Message number Error message
WARN_01 FAN ERROR
WARN_02 FAN ERROR
WARN_05 FAN ERROR
WARN_06 FAN ERROR
WARN_11 FAN ERROR
WARN_12 FAN ERROR
WARN_13 FAN ERROR
WARN_14 FAN ERROR
WARN_16 FAN ERROR
WARN_18 FAN ERROR
WARN_19 COVER DETACHED
WARN_20 DEVICE ERROR
WARN_21 DEVICE ERROR
Meaning
Trouble with power of DST board
Trouble with power of PR1 board
Trouble with power of PR2 board
Trouble with power of SY board
CN board disconnected
MX board disconnected
LPD board disconnected
CT board disconnected
DST board disconnected
PR1 board disconnected
PR2 board disconnected
Temperature of R panel is too high, and the unit stops operation.
Temperature of G panel is too high, and the unit stops operation.
Temperature of B panel is too high, and the unit stops operation.
Rear cover detached and/or internal mirror position changed
Temperature of lamp power is too high, and the unit stops operation.
Abnormal in fan 2 for lamp
Abnormal in fan 3 for lamp
Abnormal in fan 4 for lamp
Abnormal in fan 5 for lamp
Temperature of lamp power is too high, and the unit stops operation.
Abnormal in the fans for lamp power
Abnormal in the lamp power
The lamp does not light, or goes out.
Abnormal in the lamp power
Abnormal position of the lamp house cover
Trouble with power of CN board
Temperature of 8-inch duct attachment part is too high, and the unit stops
operation.
Meaning
Abnormal in fan 1 for the main power
Abnormal in fan 2 for the main power
Abnormal in fan for board 1
Abnormal in fan for board 2
Abnormal in fan for PBS B
Abnormal in fan for peltier R
Abnormal in fan for peltier G
Abnormal in fan for peltier B
Abnormal in fan for optical unit 2
Abnormal in fan for the PSCon
Air filter cover is open.
Failure of the peltier R control
Failure of the peltier G control
23
Messages