Mede8er V3 User Manual page 6

A
3.5" HDD
Most 3.5" or 2.5" SATA Hard Drive can be installed into the X3. If the unit is going to be moved around or
transported we strongly suggest you use the supplied Hard Drive securing screws. Use the Silver screw for
3.5" Hard Drives and the Black screw for 2.5" Hard Drives. Screw them in as shown in 'A' then turn the
Hard Drive around as shown in 'B'. Press the lid opening release button as shown in 'C' and carefully lift the
lid up to its maximum position.
Carefully slide the Hard Drive into position as shown in 'D'. To secure the Hard Drive and engage the
connector you need to push the Hard Drive casing with the left hard to to right side as shown in 'E'.
2.5" HDD Securing Screw (BLACK)
If you are using a 2.5" Hard Drive then you must use the Black 2.5" Hard Drive securing screws and
additionally add a black screw as indicated in 'F'. Once you have completed the Hard Drive fitment then
close the lid as shown in 'G'
To remove the Hard Drive you must firstly release it on the
Devices screen with F2 Button functionality or switch the
X3 'off' and then push the Hard Drive casing with your right
hand finger to the left side as indicated in 'H'. The Hard
Drive will be released from the Sata connector and then it
can be lifted out.
B
2.5" HDD
D
2.5" HDD
F
C
E
G
H
Page5