Ford 2014 ESCAPE Owner's Manual page 297

Ford 2014 escape
Hide thumbs Also See for 2014 ESCAPE:
Table of Contents

Advertisement

Pairing a Phone for the First Time
Note: SYNC can support downloading up
to approximately 1000 entries per
Bluetooth-enabled cellular phone.
Note: Make sure to switch on the ignition
and the radio. Put the transmission in
position P.
Note: To scroll through the menus, press
the up and down arrows on your audio
system.
Wirelessly pairing your phone with SYNC
allows you to make and receive hands-free
calls.
1.
Press the phone button. When the
display indicates there is no phone
paired, press OK.
2. When Find SYNC appears in the
display, press OK.
3. Put your phone into Bluetooth
discovery mode. See your device's
manual if necessary.
4. When prompted on your phone's
display, enter the six-digit PIN provided
by SYNC in the radio display. The
display indicates when the pairing is
successful.
Depending on your phone's capability and
your market, the system may prompt you
with questions, such as setting the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up) and
downloading your phonebook.
Pairing Subsequent Phones
Note: Make sure to switch on the ignition
and the radio. Put the transmission in
position P.
Note: To scroll through the menus, press
the up and down arrows on your audio
system.
Escape (TM2) , enUSA
SYNC
(If Equipped)
1.
2. Scroll to Bluetooth Devices. Press OK.
3. Scroll to Add Bluetooth Device. Press
4. When Find SYNC appears in the
5. Put your phone into Bluetooth
6. When prompted on your phone's
The system then prompts with questions,
such as if you would like to set the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up) and download
your phone book.
Phone Voice Commands
Press the voice icon and say "Phone". Say
any of the following:
"Call <name> on mobile OR cell"
294
Press the phone button, and then scroll
to System Settings. Press OK.
OK.
display, press OK.
discovery mode. See your phone's
manual if necessary.
display, enter the six-digit PIN provided
by SYNC in the radio display. The
display indicates when the pairing is
successful.
"PHONE"
"Call <name>"
"Call <name> at home"
"Call <name> at work"
"Call <name> in office"
"Call <name> on other"
"Call history incoming"
"Call history missed"
1,2
1,2
1,2
1,2
1,2
1,2
2
2

Advertisement

Table of Contents
loading

Table of Contents