Seat Removal - Honda CB250 Nighthawk Owner's Manual

Refer to Saf ety Precautions
The seat must be removed to access the
owner's manual and to remove the side
cover.
LEFT SIDE
(1)
(4)
(6)
(1) ignition key
(2) helmet holder
(3) seat lock lever
on page 54
(2)
(3)
(5)
(4) seat
(5) prongs
(6) fuel tank stay
. Removal
1. Insert the ignition key (1) into the
helmet holder (2).
2. Turn it clockwise and pull the seat lock
lever (3) downward.
3. Pull the seat (4) back and up.
Installation
1. Insert the prongs (5) into the fuel tank
stay (6), and the stays at the rear of the
frame.
2. Push down on the rear of the seat.
3. Turn the ignition key counterclockwise
to lock the seat, then remove the key.
Be sure to securely lock the seat after
reinstalling it.

Seat Removal

Servicing Your Honda
71