Honda CB250 Nighthawk Owner's Manual page 161

If You Have a Flat Tire
2. Tighten the front axle nut to the
specified torque:
43 lbf·ft (59 N·m , 6.0 kgf·m)
3. Install the brake cable and front brake
adjusting nut.
4. Operate the front brake and pump the
fork several times. Check for free
wheel rotation after the brake is
released. Recheck the wheel if the brake
drags or the wheel does not rotate freely.
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capability.
5. Install the speedometer cable and
tighten the screw securely.
152
Taking Care of the Unexpected