Sleep Feature; On-Screen Menus; Programming The Sleep Timer; Canceling The Sleep Timer - RCA RCU430D User Manual

RCU430D_US_IB_REVC 7/16/03

Sleep Feature

The Sleep feature turns off your TV automatically at a
duration you choose from 1 to 99 minutes. To program
your remote to control the Sleep feature, follow these steps:

PROGRAMMING THE SLEEP TIMER

1. Press and hold the SLEEP key
INDICATOR
SLEEP LIGHT
until the indicator light illuminates.
Release the SLEEP key.
2. Enter time in minutes using the
numerical key pad. The indicator
1 2 3
light should turn off. (Minute 1 thru
4 5 6
9: press 0 before the actual number.
Maximum: 99 minutes).
7 8 9
0
3. Leave remote aimed at television.
(
IMPORTANT
not work unless remote is left aimed
at television).

CANCELING THE SLEEP TIMER

The Sleep Timer program can be
(BLINK)
SLEEP
canceled and reset to zero by either
of the following:
1. Press and hold the SLEEP key
OR
until the indicator light blinks.
POWER
2. Press the POWER key, turning TV off.

On-screen Menus

This remote cannot access every menu system of all models
and brands of consumer electronics components. However,
if you've successfully programmed the VCR•DVD key to
operate a DVD player, you can access DVD disc menus with
the MENU key.
The MENU key will also access TV menu systems for
most RCA, GE and PROSCAN TVs, as well as some other
popular brands. Also, some RCA VCR menus are supported
by this remote's MENU key. This remote also supports
select satellite receiver menus.
If this remote's MENU key doesn't access the menu system
for your component, you'll need to use the original remote
to change menu settings.
This remote's MENU key doesn't support cable box
Note:
menu systems and some VCR menu systems.
10
15:22 Page 10
: The Sleep Feature will
OR