Table of Contents
Advertisement
UNITS OF MEASURE
To set your preferences for the type of units used in maps and instructions:
Tap Menu >
> Settings >
•
Tap English or Metric
•
Tap OK to apply the settings and return to the Settings menu.
•
BACKLIGHT
Adjust your mobile device's backlight settings to save battery power.
Tap Menu >
> Settings >
•
Tap On with GPS, Always On, On Near Turn, or Use Device's
•
Settings
Tap OK to apply the settings and return to the Settings menu.
•
INFO BAR
Once you've planned a journey and selected GO, Spotter GPS Navigator will
display a driving view with useful information about your journey in the Info
Bar at the base of the screen.
You can decide how the information bar should be displayed and select what
information is shown.
Tap Menu >
> Settings >
•
To decide how the information bar is displayed, choose from the following:
•
Single Display - To show only one of the information options, for example
your estimated time of arrival at a destination.
•
Dual Display - Lets you select two information options, for example your
estimated time of arrival and distance remaining to destination.
32
>
> Units of Measure
>
> Backlight
>
> Info Bar
•
Loop Single Display - Shows all information about your journey by
displaying one option then rotating to another.
In display mode you can also display the info bar
by tapping on it.
To decide what information is displayed, choose from the following:
•
Destination
•
Nearest Crossroad
•
Estimated Time of Arrival
•
Estimated Travel Time
•
Altitude
•
Latitude/Longitude
Tap OK to apply the settings and return to the Settings menu.
•
Current Road
•
Nearest Town
•
Speed
•
Distance Remaining
•
Latitude/Longitude
33
Advertisement
Table of Contents
