Table of Contents
Advertisement
•
The address will appear on the trip list as a stop, with a flag icon
next to it.
•
Tap the address and a
pop-up menu will
appear containing a list
of options. Tap
Set as Waypoint
The address will now be listed as a Waypoint, with an arrow icon
than a stop to indicate that it is a Waypoint.
Make a Waypoint a Stop
To change a Waypoint back to a Stop, tap the address and
select Set as Stop from the pop-up menu.
SAVE TRIP
When you have finished entering all your destinations, you can save your trip
to access at a later date, rather than start driving right away.
Tap Options > Save
•
Enter a name for the trip you are saving. Tap OK and your trip will be saved.
•
LOADING A SAVED TIP
Tap Options > Load
•
Tap the trip that you would like to load from the list then tap Open > Go.
•
20
DELETE A PLANNED TRIP
To delete current planned trip:
Tap Options > Clear
•
You will be asked to confirm this selection. To continue with deleting the trip
select Yes in the Warning - Are you sure? menu.
To delete previously saved planned trip:
Tap Options > Load
•
Tap the trip that you would like to delete from the list then tap Delete.
•
NOTE:
You will NOT be asked to confirm this selection.
rather
RETURN TRIP
Once you have completed your journey, use Spotter GPS Navigator to guide
you for your return.
•
Menu > Plan or Edit Trip > Add Stop >
•
Select Routing Type by tapping Quickest or Shortest and select Toll road
preferences by using the up and down arrows and tap OK.
NOTE:
If you do not want to choose routing type each time, tap check box next
to Don't show this message again.
A route preview will be displayed. Tap Go.
•
> Return Trip
21
Advertisement
Table of Contents
