Table of Contents
Advertisement
Phase Invert
The Phase is normally fixed in the GOLD. It can be changed internally. On the
GOLD DAC board a 4 position DIP switch allows several configuration options.
The DIP switch position #2 on the GOLD LINK DAC circuit board allows phase
invert to be changed. The switch is normally in the ON position. The phase is
inverted when switched off.
Analog Pass-Through - The criteria for switching the analog pass through can be
changed. In the normal mode, switching occurs anytime a digital source is on. With
a zero detect mode, the switching occurs anytime nothing is playing. This means
that turning on a source will have no effect, but playing it will. In this mode the unit
will click when the user changes tracks. To activate this mode, turn switch # 1 and
#2 OFF.
Digital Zero Option
The analog bypass is normally interrupted when a digital input is active. Active
means that the source plugged in is turned on, not necessarily playing. This feature
can be changed to only switch when nonzero digital audio signals are present. It
will ignore data such as Dolby Digital and DTS signals. In this case the analog
input is only interrupted when the digital source is playing valid audio, not just
turned on. Switch 1 of the DIP switch U6 on the GOLD DAC board sets this mode.
The switch is normally ON. Turning the switch OFF changes the mode. This mode
only works with the phase inverted. Switch 2 must also be turned OFF.
S
L
WITCH
OCATION
P
HASE
Z
ERO
ON
8
Advertisement
Table of Contents
