Troubleshooting; Warranty Statement - CookTek MC1800G Owner's Manual

TROUBLESHOOTING

Symptom Probable Cause
No power ● Unit unplugged
(No lights or fan ● No power to receptacle
noise)
Pan does not heat ● Pan is not induction
efficient
● Pan diameter is less
than 7 inches
● Pan not centered over
cooktop logo
Cooktop suddenly ● Possible power brown
stops heating out
● Circuit shared with
another electrical device
● Air vents blocked or
insufficient air circulation
● Safety shut-off engaged
Pan does not get ● Extension cord in use
hot enough even ● Circuit shared with
though power levels another electrical device
are set to maximum
- induction efficient
pan in use
Pan cooks ● Pan is not induction
unevenly, does not efficient
maintain heat level, ● Pan bottom may not be
or overheats flat enough
● Pan not centered over
cooktop logo
● Pan diameter is less
than 7 inches
Possible Solution
● Plug unit into appropriate
receptacle
● Make sure that receptacle is
energized
● Check wall switches
● Check circuit breaker
● Plug a different electronic device
into the receptacle to make sure
that power is present
● Use induction efficient pan
● Use a larger induction efficient pan
● Center pan
● Assure proper voltage/power levels
● Make sure the cooktop is not
sharing a circuit with other
electrical devices
● Check air vents to make sure that
they are not blocked. Make sure
that there is sufficient air flow
around the appliance.
● The safety shut-off will engage if an
empty pan is left on the cooktop
surface while the unit is working at
full power. Make sure that the
cooktop surfacce is clear. Wait 15-
20 minutes for the unit to reset.
● DO NOT use extension cords.
Extension cords may affect the
power levels reaching the
appliance.
● Make sure that the cooktop is not
sharing a circuit with other
electrical devices.
● Use induction efficient pan
● Use flatter pan
● Center pan
● Use a larger induction efficient pan
13

WARRANTY STATEMENT

Manual Apogee 10334_A USINTL
10