For Your Safety Read Before Lighting - Prime Heat PH18 Installation And Operating Instructions Manual

OPERATING INSTRUCTIONS
A. This appliance is equipped with an ignition device which automatically lights the pilot. Do not try to light the unit by
hand.
B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas
is heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
• Do not attempt to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
C. Use only your hand to push in, or turn the gas control knob. Never use tools. If the knob will not push in or turn by
hand, don't try to repair it. Call a qualified service technician. Force or attempted repair may result in a fire or explo-
sion.
D. Do not use this appliance if any part of it has been under water. Immediately call a qualified service technician to inspect
the appliance and to replace any part of the control system and any gas control that has been under water.
Piezo
Ignitor
Switch
Figure 40 - Location of Piezo Ignitor, Control Knobs and Switch on Millivolt Unit
26

FOR YOUR SAFETY READ BEFORE LIGHTING

If you do not follow these instruction
exactly, a fi re or explosion may result
causing property damage, personal
injury or loss of life.
Control Knobs
65D2035