Table of Contents
Advertisement
Getting started - initial set up
1
2
3
First Time Installation
4
Language
C
o
u
t n
y r
Environment
L
C
N
Auto Tunning
OK
Tunning setup
5,6 *
Tune type
Digital Type
Scan Type
Network ID
Frequency
Symbol Rate
Start
OK
Tunning setup
7
Tune type
Digital Type
Satellite
Satellite
Scan Mode
Channel Type
All Channels
Service Type
State
Start
OK
MENU
Auto Tuning Status
8
Analog channels found
Digital channels found
Radio channels found
Data channels found
Analog channels found
EXIT
OK
28
1.
Using the RF cable supplied, connect the TV to the TV Aerial wall socket (Fig A).
Connect the power cable to the Electrical outlet (Fig B).
2.
Turn on the device with marked ON/OFF switch
3.
Insert the batteries supplied into the Remote control and press the Standby
button to power on the TV.
4.
You will now be welcomed with the initial set-up screen. If it does not appear, on
the remote control, please press [MENU] then 8-8-8-8 and the menu will appear.
Press OK on the remote control and tuning will start.
As part of our continuing eff orts to reduce energy consumption, we added a
new Ecohome feature (appears on the screen fi rst installation). This function
helps reduce energy consumption up 15% compared to other modes. The image
brightness is reduced using Ecohome mode. If this setting does not suit your
environment, you can choose from other modes (Note: the professional mode is
the optimal default mode, but consumes 15% more than the Ecohome).
Please select desired language, country and environment. Set LCN* to ON if you
STANDB Y
want to arrange found channels by cable provider preferences (only applies to
DVB-C channels).
TV/RADIO TV GUID
Press OK button to start the tuning process.
ATV
5.
In the next step select the type of digital broadcasting. You can choose between
DVB-T (terrestrial), DVB-C (cable) DVB-S2(satellite). The analog channel will be
searched automatically, as most of the cable network includes analog channels. *
6.
Select DVB-C if your TV is connected to a cable TV network. Keep all default
settings as possible. Then press [OK] to start the search. If DVB-C channels are
missing, contact your network provider for the valid "Network ID" . Then perform
English
a new search. Press the [MENU], select "Automatic Channel Search" and enter the
A
u
s
r t
a i
network ID. Start your search by clicking [OK]. *
Ecohome
7.
Optional channel presets DVB-S2: Select "Satellie" in the "Digital-type" in the
O
N
menu for the optional channel presets. Here you can choose between the satelli-
te operators. Then the channel preferences of the operator will be imported into
your TV system. If you set country to Austria in previous step you can select form
predefi ned regional settings.
ATV + DTV
The execution takes about 10 seconds. Confi rm with [OK] button on the remote
DVB-C
control, the scanning starts ..
Full
8.
After successful tuning process, following screen will appear.
Auto
Auto
If you are missing channels, the reason for this is likely to be signal strength, you
Auto
should consider connecting signal booster and re-tuning the TV.
Back
MENU
Tip:
DTV
Astra
Default
All
nels/ programmes) you will need to increase the signal reception in order to
WIEN
Back
receive all of the channels available. The most economical way to do this is by
purchasing and connecting a 'signal booster' in between the TV and the TV
5
aerial socket. If this does not solve the problem, you will need to upgrade the TV
5
5
aerial to a digital hi-gain compatible aerial
5
5
* - Only for models with DVB-C tuner
If the TV fi nds some, but not all, of the Digital channels, the TV is
functioning correctly but the signal being received is not strong
enough. (The signal strength needs to be above 85% - you can see
the signal strength the TV is receiving when you change chan-
Hide quick links:
Advertisement
Table of Contents
