Important safety instructions a place with direct sunshine as it has a negative eff ect on CAUTION cooling of the appliance. Heat storage is dangerous and it can seriously reduce the lifetime of the appliance. In order RISK OF ELECTRIC SHOCK DO NOT OPEN to ensure the safety, ask the qualifi ed person to remove the dirt from the appliance.
Page 3
Important safety instructions Important information regarding use of Batteries video games, computers, captions and Observe the correct polarity when inser- ting the batteries. other fi xed image displays. Do not expose batteries to high tempera- tures and do not place them on locations The extended use of fi xed image program material can where the temperature might increase cause a permanent “shadow image “...
Page 4
Important safety instructions 3D Safety Information If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight. Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes.
What is included in the box Accessories Supply of this TV includes following parts: 3D glasses* 1x TV S TA N D B Y MU T E TV/R ADIO TV GUIDE E J E C T US B R E C PVR DVD TIME S HIFT S O U R C E...
Device Installation Important Note Attaching the Stand Please follow the instructions in the Stand installation Position the TV close to the wall to avoid the possibility of it leafl et, located in the accessories bag. falling when pushed. The instructions shown below are a safer way to set up the Wall mounting the TV TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled.
Getting started - initial set up Using the RF cable supplied, connect the TV to the TV Aerial wall socket (Fig A). Connect the power cable to the Electrical outlet (Fig B). Turn on the device with marked ON/OFF switch Insert the batteries supplied into the Remote control and press the Standby button to power on the TV.
TV buttons & Source menu Eject * Play / Pause * Vol+ Volume up and menu right Vol- Volume down and menu left Programme/Channel up and menu up Programme/Channel down and menu down MENU Displays Menu/OSD SOURCE Displays the input source menu STANDBY Standby Power On/Off Choosing Mode Input/Source...
Remote control STANDBY – Switch on TV when in standby or vice versa. MUTE – Mute the sound or vice versa. STANDB Y MUTE TV/RADIO – Switch to Digital and switch between TV and radio in Digital mode. TV/RADIO TV GUIDE TV GUIDE –...
Page 10
Connections Mini Video * Mini video input and Audio input rot YPbPr USB-Input and Video HDMI 1, 2 * , 3* in SCART * HDMI-Input 1, 2*, 3* SCART-Input VGA(PC) * CI Card IN VGA PC-Input SCART input VGA (PC) Audio In * RF In 3.5mm PC audio input RF / TV Aerial Input...
Page 11
Connections Connecting a DVD Player/Recorder, Video Recorder or Cable/Satellite Box TVs Input/Source should be set to SCART. SCART SCART RF OUT RF IN RF IN Connecting a Camcorder, Camera or Games Console Connecting a High Defi nition (HD) Device Das HDMI- TVs Input / Source should be set to Video.
TV Menu operation TV Menu navigation | Channel | Picture TV Menu navigation Picture Picture Mode Ecohome Contrast Brightness Colour Tint PICTURE Sharpness Colout temp Normal Noise reduction To access this menu, press [MENU] button on the remote 3D Setup control.
Page 13
TV Menu operation 3D Settings* 3D Settings * 3D Setup 3D Type Side by side Exchange 3D L/R Picture Mode Ecohome Contrast 2D to 3D Brightness Colour 3D to 2D Tint PICTURE Sharpness 2D to 3D Depth Middle Colout temp Normal Noise reduction Back...
Page 14
TV Menu operation Sound | Time | Lock Sound Time Sound Mode Standard Clock -- -- -- -- Treble Off time Bass On time Balance Time Zone GMT+1 Auto Volume Level Sleep timer SOUND TIME Digital Output Auto standby AD Switch OSD Timer 30 S Move...
Page 15
TV Menu operation Setup Setup HDMI CEC - Allows you to operate devices conected via HDMI with TV remote control. Auto power - Atomatically turn on/off conected devices via HDMI CEC Device menu - Allows you to acess devices menu and Language English operate the menu using TV remote control.
TV Menu operation PC Settings | 7 Day TV Guide | USB record* PC Settings 1. Press [TV GUIDE]. The following 7 Day TV Guide will appear. 2. Navigate through the menu using / / / . You can now: Record a Programme by pressing RED.* Set a reminder by pressing GREEN.
TV Menu operation Pause Live TV (Time Shift)* | USB mode / Media player Pause Live TV (Time Shift) * Pausing Live TV is very simple. REC LIST 1. You can navigate through the menus using the scroll - Press the play/pause button and the television will pause buttons.
DVD Menu * D.MENU D.SETUP TITL E TEXT INDEX VEAL HOL D To access this menu, press [D. MENU] button on the remote Dolby Digital Page control. If you wish to make changes to any of the default Dual Mono settings, use the scroll buttons.
Frequently asked questions General I would like to have louder There are 2 options: sound by connecting 1) Use Digital COAX output connected to an external amplifi er/surround sound additional speakers. system. 2) Use the 3.5mm headphone output and a 3.5mm to phono cable (available separately) to connect to an amplifi er/surround sound system.
Page 20
Universal Media Corporation /Slovakia/ s.r.o. Mickiewiczova 7104/14, 811 07 Bratislava 1, Slovakia Assembled in Europe BLA/MAN/0076...