Radio Operation - Akai AB-50 User Manual

1. Insert the main plug into a main supply power outlet.
2. Select the FUNCTION switch to RADIO position.
Slide the BAND switch to select AM / FM ST band.
3.
Rotate the TUNING control knob to search for the desire station.
4.
Rotate the VOLUME control knob to the desire volume sound.
5.
6. To turn off the unit power, select the FUNCTION switch to OFF position.
NOTES:
To have the best AM reception, slightly rotate the unit or move the unit to a different area of the room
until the best reception is obtained.
To obtain the best FM reception, fully extend the FM antenna. Avoid close proximity to the speakers and
other electrical appliance.
1. Insert the main plug into a main supply power outlet.
2. To open the CD door by lifting the Open/Close area near the CD door. Insert disc into the disc
compartment with the title side upwards.
3. Close the CD door, select the FUNCTION switch to CD position, "---" is displayed for few seconds,
and total number of tracks will show on the LCD display.
4. Press the PLAY/PAUSE button to play the CD.
5. Press SKIP /
6. Press and hold SKIP
7. During CD play, press the PLAY/PAUSE button to pause CD playing and press again to resume.
8. During playback, press the 10+ / FOLDER+ button to skip up by 10 tracks if destination track is
inside the folder. Press and hold the 10+ / FOLDER+ button for more than 1 sec. to skip to next
folder.
9. Press the STOP button to stop the CD playing.
10. After all tracks have been played; the CD player will stop automatically.
NOTES:
Do not open the CD compartment while the disc is playing or rotating.
First press the STOP button. This unit can play Music CD & MP3 Disc format.

RADIO OPERATION

CD & MP3 Disc MODE
buttons to jump to next or previous track.
/
buttons to search rapidly within a track to locate a specific passage.
15