Adjusting An Option/Setting - AEG FAVORIT 88070 i User Information

• Use the OK/START button to switch from the menu item SETTINGS...
to the Settings sub-menu.
The Settings sub-menu
Go to the desired setting using the direction buttons (
info status bar your position within the sub-menu is always shown.
• LANGUAGE
To set the language of the text line in the display; also see the section
"Resetting the language".
• WATER HARDNESS
To set the value for water hardness electronically (value range 1 to
10).
• RINSE AID
When option 3 IN 1 is activated: Switch rinse-aid addition function
on or off.
When option 3 IN 1 is not activated: The rinse-aid addition function
is always switched on, even if OFF is selected for RINSE-AID.
• SOUND VOLUME
To set the sound volume of the acoustic signals (value range 0 to 5);
at 0 the acoustic signals are switched off.
• BRIGHTNESS
To set the brightness of the display (value range 1 to 10).
• CONTRAST
To set the contrast of the display (value range 1 to 10).

Adjusting an option/setting

1. Go to the option or setting that you wish to adjust.
2. Press the OK/START button. The value that is currently set will flash.
3. Using the direction buttons (
4. Press the OK/START button. The newly set value is lit without flashing.
5. Using the direction buttons (
setting.
3
A selected value is accepted using the OPTION button. In the display
the first entry in either the Options or Settings menu is displayed.
3
You can abort the setting procedure using the RESET button.
1. not available with all models
1
or ) select the desired value.
or ) you can select another option or
or ). In the
11