Adjusting An Option/Setting - AEG FAVORIT 88070 User Information

The Options menu
• Here go to the desired setting using the direction buttons (
• For the option DELAY START see the section "Setting a delay start" for
the option 3 IN 1 see the section "Before using for the first time"
• Use the OK/START button to switch from the menu item SETTINGS...
to the Settings sub-menu.
The Settings sub-menu
Here go to the desired setting using the direction buttons (
• LANGUAGE
To set the language of the text line in the display; also see the section
"Resetting the language".
• WATER HARDNESS
To set the value for water hardness electronically (value range 1 to
10).
• RINSE AID
To activate or deactivate the inflow of rinse aid.
• SOUND VOLUME
To set the sound volume of the acoustic signals (value range 0 to 5);
at 0 the acoustic signals are switched off.
• BRIGHTNESS
To set the brightness of the display (value range 1 to 10).
• CONTRAST
To set the contrast of the display (value range 1 to 10).

Adjusting an option/setting

1. Go to the option or setting you want to adjust.
2. Press the OK/START button. The value currently selected will flash.
3. Use the direction buttons (
4. Press the OK/START button. The newly selected value will be lit up con-
tinuously.
5. You can use the direction buttons (
setting.
3
By pressing OPTION a selected value is entered. The display will show
the first entry in the options/settings menus.
3
You can use the key combination RESET to cancel a settings procedure.
1. not available with all models
1
or ) to select the value required.
or ) to select another option or
or ).
or ).
11