Fujitsu iScanner fi-6010N Getting Started Manual page 29

If some other error occurs
Message
An error has occurred. Try turning the power off
and back on again. If the problem reoccurs after
restarting, try disconnecting the scanner power
cord, reattaching it, and restarting again. If the
problem still persists, the administrator should
contact the FUJITSU scanner dealer or an autho-
rized FUJITSU scanner service provider for
help. [alphanumeric eight digits]
Action
Try the following:
If the scanner does not restart automatically,
press the [Shutdown] button on the "Login"
screen to turn the power off, and turn the
power back on again to restart the scanner.
If the error status persists after the scanner is
restarted, press the [Shutdown] button on the
"Login" screen, disconnect the AC cable
from the scanner to turn the power off, wait
for at least 10 seconds, then reconnect the
AC cable and try turning the power back on
again. If the error status persists, contact
your FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
18