Main Menu
Table of Contents
Compass System (U.S. model without navigation system)
Setting the Clock
To set the clock, the ignition switch
must be in the Accessory (I) or ON
(II) position.
Say ''Set up'' or press the SET UP
button on the center console to
display the Set up screen. Then
move the interface dial to the right.
272
Select the
Clock Adjustment
turning the interface knob to the
right, then press the center of the
interface selector.
by
Select the
Time Adjustment
press the center of the interface
selector. The display changes to the
Time Adjustment
, then
screen for HOUR.