Easy Setting - Panasonic DMR-PWT520 Operating Instructions Manual

Easy Setting

1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Follow the on-screen instructions and make
the settings.
• When the Download from TV screen
appears, the setting information on the TV
is acquired by this unit. (
• When the Auto Setup screen appears, the
unit searches for the terrestrial digital
channels. It takes about 3 minutes.
Digital TV Auto Tuning
Progress
This will take about 3 minutes.
RF Ch Channel Name
35
35
Digital TV: 2
Searching
RETURN
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (
64)
CH 6 69
Type Quality
Digital TV
10
10
Digital TV
80, Clock).
4
Set "Power Save" to "On", "On Timer" or
"Off", then press [OK].
Power Save in Standby
From
12 AM
• On
It will go into the Power Save in Standby
mode.
• On Timer
Set the start and stop time and then press
[OK].
• "Power Save in Standby" is activated
when the set time comes.
• Off
It is possible to start quickly from standby
mode. (Quick Start mode)
• If you use Home Network function (
select "Off". This function is not available
with other settings.
When "Easy Setting has been completed."
appears, Easy Setting is complete.
To stop partway
Press [RETURN ].
To restart setup
1 Press [SETUP]. (
2 Select "Auto Setup" in "Digital TV Tuning",
then press [OK].
3 Select "Yes", then press [OK].
If the TV aspect setting screen appears
Refer to "TV Aspect". (
To confirm that channels have been tuned
correctly
Refer to "Using Channel List". (
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Getting started
Power Save
On
To
6 AM
79),
18)
76)
23)
VQT4C70
19