Vista Tm 64-Bit Without Raid Functions; Installing Windows ® 2000 / Xp / Xp 64-Bit Without - ASROCK P43R1600Twins-WiFi User Manual

2 . 1 7 2 . 1 7 2 . 1 7 2 . 1 7 Installing Windows 2 . 1 7 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista TM TM TM TM TM 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions
Vista Vista 64-bit Without RAID Functions 64-bit Without RAID Functions
If you want to install Windows
on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
Since Windows
vendor, RAID / AHCI functions are not supported under Windows
2.17.1 2.17.1 2.17.1 Installing Windows Installing Windows Installing Windows
2.17.1 2.17.1 Installing Windows Installing Windows
W W W W Without RAID F ithout RAID Functions ithout RAID F ithout RAID F ithout RAID F
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.16.1 step 2 on
page 39.
®
STEP 3: Install Windows
not supported.)
After making a SATA / SATAII driver diskette, you can start to install Windows
64-bit on your system. At the beginning of Windows
party AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing
®
the Intel AHCI driver. After reading the floppy disk, the driver will be presented. Select
the driver to install according to the mode you choose and the OS you install. You may
select: "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP)" for Windows
XP or "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP64)" for Windows
XP 64-bit.
Using SATA / SATAII HDDs and eSATAII devices without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
STEP 2: Install Windows ®
® 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
®
2000 / XP / XP 64-bit / Vista
®
2000 RAID / AHCI driver is not provided by the chipset
® 2000 / XP / XP 64-bit 2000 / XP / XP 64-bit 2000 / XP / XP 64-bit
2000 / XP / XP 64-bit 2000 / XP / XP 64-bit
unctions unctions unctions unctions
® 2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs
Advanced screen
XP / XP 64-bit OS on your system. (Windows
® setup, press F6 to install a third-
Advanced screen
2000 / XP / XP 64-bit OS on your system.
4 3 4 3 4 3
4 3 4 3
TM TM TM
TM TM / / / / /
TM TM
/ Vista 64-bit OS
®
2000.
IDE Configuration.
®
2000 is
® XP / XP
IDE Configuration.
®
®