Driver Installation Guide; Installing Windows ® 2000 / Xp / Xp 64-Bit / Vista; Vista Tm 64-Bit Without Raid Functions; Installing Windows ® 2000 / Xp / Xp 64-Bit Without - ASROCK P43DE3 User Manual

This Manual: http://www.manuallib.com/file/2441065
2 . 1 4 2 . 1 4

Driver Installation Guide

Driver Installation Guide
2 . 1 4 2 . 1 4 Driver Installation Guide 2 . 1 4 Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 5 2 . 1 5 Installing Windows 2 . 1 5 Installing Windows Installing Windows Installing Windows
2 . 1 5 2 . 1 5 Installing Windows
Vista Vista Vista 64-bit W 64-bit W 64-bit Without RAID F ithout RAID Functions ithout RAID F ithout RAID F
Vista Vista TM TM TM 64-bit W 64-bit W ithout RAID F
TM TM
If you want to install Windows
®
on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
Since Windows 2000 AHCI driver is not provided by the chipset vendor,
®
AHCI function is not supported under Windows
2.15.1 2.15.1 2.15.1 Installing Windows Installing Windows Installing Windows
2.15.1 2.15.1 Installing Windows Installing Windows
W W W W Without RAID F ithout RAID F ithout RAID Functions ithout RAID F
ithout RAID F
If you want to install Windows 2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs
®
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, "Do you want to generate Serial
ATA driver diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>.
E. The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
® ® ® ® ® 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
unctions unctions unctions
unctions
2000 / XP / XP 64-bit / Vista / Vista
TM
2000.
®
2000 / XP / XP 64-bit 2000 / XP / XP 64-bit 2000 / XP / XP 64-bit
® ® ® ® ® 2000 / XP / XP 64-bit 2000 / XP / XP 64-bit
unctions unctions unctions
unctions
Advanced screen Storage Configuration.
3 1 3 1 3 1 3 1 3 1
/ / / / /
TM TM TM
TM TM
64-bit OS
TM