Targa PNA-M4320T User Manual And Service Information page 20

Navigation Device PNA-M4320T
Once the car mount has been fixed in place you can insert the navigation
device into the mounting bracket. Loosen the screws of the car mount to
change the navigation device position and then tighten the screws in the
chosen position (see figure, arrows 4 and 5).
To loosen the navigation device from the mounting bracket, press the latch
on top towards the back of the mounting bracket and remove the device.
To remove the car mount from the windshield, rotate the lock again and then
pull from the latch located at the bottom of the suction pad (see figure,
arrow 6).
Do not install the car mount (with or without the navigation
device) within the operating area of the vehicle's airbag and
install the car mount so that the driver's view is not obstructed.
English
19