Recharging In The Car - Targa PNA-M4320T User Manual And Service Information

Navigation Device PNA-M4320T

Recharging in the Car

1. Plug the Mini-USB connector of the car charger cable [page 1,
item 7] into the receptacle [page 12, item 9] of your navigation
device.
2. Then connect the car charger to a suitable cigarette lighter in your
car.
3. The charging process starts automatically, and the charger indicator
[page 12, item 10] lights blue. When the charging cycle is completed,
the status indicator will stop lighting.
You can connect the car charger to a 12V or 24V cigarette
lighter.
The car charger design varies according to the region. Therefore
the figure may differ from the supplied device.
In order to protect your device from any sudden voltage surges,
connect the car charger after you have started your car engine.
English
15