Recharging From A Computer - Targa PNA-M4320T User Manual And Service Information

Navigation Device PNA-M4320T

Recharging from a Computer

1. Plug the Mini-USB connector of the USB cable [page 1, item 9] into
the receptacle [page 12, item 9] of your navigation device.
2. Next, plug the flat connector of the USB cable into a free USB port
on your computer.
3. The charging process starts automatically, and the charger indicator
[page 12, item 10] lights blue. At the same time, the computer will
establish a connection to the built-in memory of the device. This
connection is required to modify the software contents (see
page 118).
English
17