LiteOn HD-A940G User Manual page 49

Before you start
► Check whether the DV is correctly connected to
the inputs of this recorder.
DV / Link
DV-Link Camcorder
IEEE 1394
DV OUT
Recording with 'Rec Link'
The 'Rec Link' feature allows you to easily record
DV footage with the recorder's remote control. This
function is enabled by default.
1
Press SOURCE repeatedly to select 'DV' as the
signal source.
Recording_02_05
The control bar will appear with the 'Rec Link' fea-
ture enabled. You can control your DV either through
the on-screen control bar using  and ENTER
buttons, or through the control keys on DV.
2
Press HDD/DVD to select your target medium.
If you would like to record on disc, press
CLOSE to open the disc tray, and place a recordable
disc on the tray.
Press OPEN/CLOSE again to close the tray.
3
Switch your DV to playback mode.
Start playback on DV, and pause the playback at
the beginning of a scene you wish to record.
4
Press  RECORD to start recording.
 RECORD,
After you press
start playing back the footage.
5
Press PAUSE/STEP to pause recording.
DV will continue playing back the footage.
6
Recording without 'Rec Link'
1
2
3
4
5
6
7
OPEN/
8
DV will automatically
49
Press  STOP to stop recording.
DV will stop playing back the footage.
Press SOURCE repeatedly to select 'DV' as the
signal source.
Press  to select 'Rec Link' button on
the screen, then press ENTER to switch off the
function.
You can control your DV either through the
on-screen control bar using  and ENTER
buttons, or through the control keys on DV.
Recording_02_05
Press HDD/DVD to select your target medium.
If you would like to record on disc, press
CLOSE to open the disc tray, and place a recordable
disc on the tray.
Press OPEN/CLOSE again to close the tray.
Switch your DV to playback mode.
Press  to select a desired function from
the on-screen control bar, then press ENTER.
Pause the playback at the beginning of a scene
you wish to record.
Press  RECORD to start recording.
Press PAUSE/STEP to pause recording.
Press  STOP to stop recording.
Press  RECORD again to start another recording
session.
OPEN/